Warm White Ribbon

The Warm White Ribbon is an over 16 foot long strand of 300 SMD LEDs with a 3200K color temperature output. It is perfect cove lighting solution. Use DMX to control dimming or activate 9 pre-stored effects. The 3M adhesive tape backing makes it very easy to install.

Fixture	Antistatic Bag Packaging
Size: 16'4" / 5 Meters L, .55" / 14mm W, .24" / 5mm H Weight: .75 lbs	Size: 10.5" / 5 Meters L, 10" / 14mm W, 1" / 5mm H Weight: .85 lb

The Warm White Ribbon Power Supply are used to provide power to the Color Ribbon DMX Controller and the Color Ribbon Repeater witch then provide power to each ribbon.

The Warm White Ribbon DMX Controller can directly control and power (when used with the power supply) a Color Ribbon. Via DMX controller you can control 3 channels of 256 levels. The unit also has built in pre stored effects that are accessible via the dip switches.

The Warm White Ribbon Repeater is specially designed to work with the Color Ribbon. It expends the same signal from another ribbon and allows for the introduction of another power supply. Allowing the addition of more fixtures to the same control chain. In theory, the repeater can be added unlimitedly to add more Color Ribbons.

Photos:

Specifications

Data Sheet
Owner's Manual
Brochure
DMX Chart

ShareThis

IP Rating:	IP 65
LED Quantity:	300
LED Type:	SMD-3200K
Voltage:	12V
Avg Rated Life:	30,000 Hours
Operating Temperature:	-40°c to 80°c
Fastening System:	3M adhesive tape / Mounting Clips
LED Spacing:	.65" / 16.6mm
Cuttable Every:	1.95" / 50mm

4356-Color Ribbon DMX Control
Protocol:	DMX 512
DMX Dimming:	DMX Dimming when used with a DMX 512 console
DMX Channels:	3 Channels
Input Voltage:	DC5V~DC24V
Output Current:	90W(5V) 220W (12V) 450W(24V)
Control Options:	Activate 9 pre stored effect and control speed and rate
Power Quantity:	1 Color Ribbon w/power supply (4363)
Fastening System:	Wall mountable plate
Dimensions:	4.92"L x 2.04"W x 1.57"H

4357-Color Ribbon Repeater
Input Voltage:	DC5V~24V
Output Current:	90W (5V) 220W (12V) 450W(24V)
Driving LED Max:	1 Color Ribbon
Fastening System:	Wall mountable plate
Dimensions:	4.75” L x 1.56” W x 1.55” H

4363 Color Ribbon Power Supply
Input Voltage:	100-240VAC50/60HZ
Output Voltage:	12V 60W max
Listing:	UL Listed
Dimensions:	7.5"L x 2"W x 1..48"H

Warm White Ribbon

Specifications

Gallery

Videos

Accessories

Warm White Ribbon Power Supply

Warm White Ribbon DMX Controller

Warm White Ribbon Repeater